How much horsepower does a 429 Cobra Jet engine have?

The power of this engine made it very popular for performance enthusiasts. The 429 Cobra Jet was advertised as having 370 horsepower at 5400 RPM and 450 lbs-ft of torque at 3400 RPM.

What makes a 429 a Cobra Jet?

Cobra Under Your Hood

Rather than re-engineer the stock head completely, the 429 Cobra Jet simply offered larger valves and ports, a higher compression ratio (11.3:1), and a number of other hardware upgrades to support an advertised 370hp rating (along with the ubiquitous 450 lb-ft of torque).

How much horsepower does a 428 Super Cobra Jet have?

The Cobra Jet engine was officially rated at 335 horsepower at 5600 RPM and a peak torque of 445 lb-ft of torque at 3400 RPM.

428 Cobra Jet Performance Specs.

Horespower 335 @ 5600 RPM
Compression Ratio 10.6:1
Displacement 428 Cubic Inches (7.0L)
Bore 4.13 Inches
Stroke 3.984 Inches

How many horsepower does a 429 have?

With a 4.36-inch bore and shorter 3.59-inch stroke than the 460, the 429-cu-in Cobra Jet promised at least 370 hp thanks to its snappy 11.3:1 compression ratio, and it became the go-to power plant for the late-’60s Fords.

IT\'S INTERESTING:  How long does a Nissan car battery last?

What year was the 429 Cobra Jet?

1971 Ford Mustang 429 Cobra Jet – Big-Block Fever.

How much is a 429 motor worth?

How Much Is A 429 Motor Worth? Hagerty’s valuation tool reports that the average value of a Boss 429 is $200,000.

What cars had the 429 Cobra Jet engine?

Vehicles Found With “429 Ci/370 Hp Scj” as Engine

  • 1970 Ford. Torino GT 429 Super Cobra Jet.
  • 1970 Ford. Torino Cobra 429 Super Cobra Jet.
  • 1970 Mercury. Cyclone Spoiler 429 Super Cobra Jet.

Did Ford make a 429 Cobra Jet?

The 429 Cobra Jet was a V8 engine offered by Ford Motor Company in the early 1970s that was a performance version of its regular 429 engine. This engine was primarily known for its use in the Ford Torino and was a part of the Ford 385 engine family.

What is a 351 Cobra Jet engine?

The Q-code 351 “Cobra-Jet” (also called 351-CJ, 351-4V) was produced from May 1971 through the 1974 model year. It was a lower-compression design that included open-chamber 4V heads.

What makes a Cobra Jet engine?

With 335 hp, the potent 428 CJ offered a huge leap in power over the smaller 390-cube V8, which was the top Mustang engine for 1967. Bob Tasca of Tasca Ford in Rhode Island is credited with creating the engine recipe by mixing high-flowing 427 cylinder heads with the stout bottom-end of a FE 428 to create “Cobra Jet”.

Whats better 429 or 460?

The 429, with less displacement volume, had a shorter stroke length of 3.59, meaning it produced less power per camshaft rotation than the 460, which had a stroke length of 3.85, as mentioned above. The longer stroke produces more power and also allows for more and better high-performance modifications.

IT\'S INTERESTING:  Frequent question: What does a dead engine sound like?

How do you tell a 460 from a 429?

Both the Ford 429- and 460-cubic-inch engines, members of the 385 family, fall into this category. Both came with the same block, so the only methods of positive identification involve locating the ID tag, measuring the stroke or verifying the crankshaft number.

What is a 429 engine?

429. Developed to replace the largest of the FE-series V8s, the 429 replaced the 390, 427, and 428 V8s. Introduced in the 1968 Ford Thunderbird, the engine saw use across Ford and Mercury full-size and intermediate product lines.

How much HP is a 460?

How Much Horsepower Does A 460 Ford Engine Have? A large Windsor crate engine with a 3.8 L displacement has finally been made on the Ford Performance Boss Block, the Z460. Also offering 575 horsepower and a 575 liter capacity. Ft.

What liter is a 429 engine?

429 Cubic Inches / 7.0 Liters.

Is the Ford 429 a hemi?

The racing engine dubbed the Boss 429, was an aluminum hemi-head engine design with gigantic ports and valves for high rpm use. Although the Boss 429 Hemi design worked great on the track, the large port heads were too big for street use, so the Ford engineers designed a different head for the passenger car engines.